1. Forum
  2. FidoNet Areas
  3. ELIST

  • Post-AUP 5.5 WcReports problem

    From DAVE GOURD@1:124/5013 to All on Thu Jan 31 19:16:51 2019
    Date: Wed, 15 May 2002 09:47:33 -0400
    From: DAVE GOURD
    To: ALL
    Subject: Post-AUP 5.5 WcReports problem
    Newsgroups: win.server.wcreports
    Message-ID: <1021470453.37.0@winserver.com>
    X-Mailer: Wildcat! Interactive Net Server v7.0.454.5
    Lines: 35

    After performing the v5.5 AUP, when trying to run wcreports from our
    server I got the following error(in a popup window):

    "mscomctl.ocx or one of its dependencies is not correctly registered: a
    file is missing or invalid"

    I was able to run wcreports remotely from workstations on the network,
    and all seemed normal until attempting to view any message from any
    conference under the messages tab of WcReports. I get a popup error of:

    "Runtime error "13" Type mismatch"

    Searching the server (NT 4.0 wkst sp6a) revealed mscomctl.ocx was not
    present. I placed a copy of the file from a network workstation (a win98
    se machine) into the server's /system32/ folder and wcreports appears to
    work [normally?].

    I still get the runtime error on the other workstations though, they
    are win95 and win98 OS machines.

    I searched the knowledge and message bases, the only reference to
    runtime errors I seem to find are for runtime 5 errors in the wcreports conference.

    Any ideas?

    Dave Gourd







    --- Platinum Xpress/Win/WINServer v3.1
    * Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)
  • From MARK BAPPE@1:124/5013 to All on Thu Jan 31 19:16:51 2019
    Date: Wed, 15 May 2002 22:43:53 -0400
    From: MARK BAPPE
    To: DAVE GOURD
    Subject: Post-AUP 5.5 WcReports problem
    Newsgroups: win.server.wcreports
    Message-ID: <1021517033.37.1021470453@winserver.com>
    References: <1021470453.37.0@winserver.com>
    X-WcMsg-Attr: Rcvd
    X-Mailer: Wildcat! Interactive Net Server v7.0.454.5
    Lines: 19

    I was able to run wcreports remotely from workstations on the network,
    and all seemed normal until attempting to view any message from any conference under the messages tab of WcReports. I get a popup error of:

    "Runtime error "13" Type mismatch"

    wcREPORTS actually needs to be installed an not just ran from the other workstations... There are quite a few .DLL files and .OCX files that
    need to accompany the program and those need to be registered in the
    running computers registry... What it looks like is you do not have all
    the files you need (or updated ones) to run wcREPORTS on the networked machines....

    When Hector gets back, he should be updating the redistributable install
    for wcREPORTS, and this should solve your problem.

    Mark Bappe
    S and T Software
    --- Platinum Xpress/Win/WINServer v3.1
    * Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)
  • From DAVE GOURD@1:124/5013 to All on Thu Jan 31 19:16:51 2019
    Date: Thu, 16 May 2002 09:08:41 -0400
    From: DAVE GOURD
    To: MARK BAPPE
    Subject: Post-AUP 5.5 WcReports problem
    Newsgroups: win.server.wcreports
    Message-ID: <1021554521.37.1021517033@winserver.com>
    References: <1021517033.37.1021470453@winserver.com>
    X-WcMsg-Attr: Rcvd
    X-Mailer: Wildcat! Interactive Net Server v7.0.454.5
    Lines: 47

    Thanks Mark. I'll try that but it's been installed on one of the win95
    machines since 1996 (MY first wc5 machine, now a 'retired server') and
    on the win98 box since 1998 (the second server, since retired) and on the
    winnt box since 1999.

    I also used to be able to run wcreport (and all other wc clients)
    across the LAN using 'wildcatnetworking'. Do you know if it's may have
    anything to do with vb runtime files?

    I can wait until Hector gets back on his feet, and watch here, I'll
    post the results of further attempts to resolve this.

    I wondered if anyone else had the same problem, certainly not a
    resounding show of hands so must be fairly local- in fact you are the
    first and only response.

    Thanks.

    Dave Gourd








    I was able to run wcreports remotely from workstations on the netw
    and all seemed normal until attempting to view any message from any conference under the messages tab of WcReports. I get a popup erro

    "Runtime error "13" Type mismatch"

    wcREPORTS actually needs to be installed an not just ran from the other workstations... There are quite a few .DLL files and .OCX files that
    need to accompany the program and those need to be registered in the
    running computers registry... What it looks like is you do not have all
    the files you need (or updated ones) to run wcREPORTS on the networked machines....

    When Hector gets back, he should be updating the redistributable install
    for wcREPORTS, and this should solve your problem.

    Mark Bappe
    S and T Software

    --- Platinum Xpress/Win/WINServer v3.1
    * Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)
  • From MARK BAPPE@1:124/5013 to All on Thu Jan 31 19:16:51 2019
    Date: Thu, 16 May 2002 19:21:36 -0400
    From: MARK BAPPE
    To: DAVE GOURD
    Subject: Post-AUP 5.5 WcReports problem
    Newsgroups: win.server.wcreports
    Message-ID: <1021591296.37.1021554521@winserver.com>
    References: <1021554521.37.1021517033@winserver.com>
    X-WcMsg-Attr: Rcvd
    X-Mailer: Wildcat! Interactive Net Server v7.0.454.5
    Lines: 14

    I wondered if anyone else had the same problem, certainly not a
    resounding show of hands so must be fairly local- in fact you are the
    first and only response.

    I haven't heard of anyone else running into this issue... But yes it
    very well could be the runtime files (actually I would almost gaurantee
    it)... We added some upgraded .DLL's and updated .OCX's to this build,
    so what you had before looks the same, but the under-pinnings are a bit different...

    Mark Bappe
    S and T Software

    --- Platinum Xpress/Win/WINServer v3.1
    * Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)
  • From BILL CRUZ@1:124/5013 to All on Thu Jan 31 19:16:51 2019
    Date: Sun, 16 Jun 2002 04:17:53 -0400
    From: BILL CRUZ
    To: DAVE GOURD
    Subject: RE: Post-AUP 5.5 WcReports problem
    Newsgroups: win.server.wcreports
    Message-ID: <1024215473.37.1021470453@winserver.com>
    References: <1021470453.37.0@winserver.com>
    X-WcMsg-Attr: Rcvd
    X-Mailer: Wildcat! Interactive Net Server v7.0.454.5
    Lines: 15

    Let me raise my hand... I have had this problem since the upgrade also. Been waiting for some sort of a fix. Wwill continue reading.

    webmaster@teabbs.com


    On 6/16/02 4:16 AM, DAVE GOURD wrote to ALL:

    After performing the v5.5 AUP, when trying to run wcreports from our
    server I got the following error(in a popup window):

    "mscomctl.ocx or one of its dependencies is not correctly registered: a
    file is missing or invalid"


    --- Platinum Xpress/Win/WINServer v3.1
    * Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)
  • From FRED BURGESS@1:124/5013 to All on Thu Jan 31 19:16:51 2019
    Date: Sun, 16 Jun 2002 11:58:35 -0400
    From: FRED BURGESS
    To: BILL CRUZ
    Subject: Re: Post-AUP 5.5 WcReports problem
    Newsgroups: win.server.wcreports
    Message-ID: <1024243163.37.1024215473@winserver.com>
    References: <1024215473.37.1021470453@winserver.com>
    X-WcMsg-Attr: Rcvd
    X-Mailer: Wildcat! Interactive Net Server v7.0.454.5
    Lines: 24

    This has been fixed and has been reported to how to fix.

    Do a search of the past 2-3 weeks of messages and you should find the answer
    :)


    <BILL CRUZ> wrote in message news:1024215473.37.1021470453@winserver.com...
    Let me raise my hand... I have had this problem since the upgrade also. Been waiting for some sort of a fix. Wwill continue reading.

    webmaster@teabbs.com


    On 6/16/02 4:16 AM, DAVE GOURD wrote to ALL:

    After performing the v5.5 AUP, when trying to run wcreports from our server I got the following error(in a popup window):

    "mscomctl.ocx or one of its dependencies is not correctly registered: a file is missing or invalid"



    --- Platinum Xpress/Win/WINServer v3.1
    * Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)
  • From DAVE GOURD@1:124/5013 to All on Thu Jan 31 19:16:51 2019
    Date: Sun, 16 Jun 2002 12:35:31 -0400
    From: DAVE GOURD
    To: BILL CRUZ
    Subject: RE: Post-AUP 5.5 WcReports problem
    Newsgroups: win.server.wcreports
    Message-ID: <1024245331.37.1024215473@winserver.com>
    References: <1024215473.37.1021470453@winserver.com>
    X-WcMsg-Attr: Rcvd
    X-Mailer: Wildcat! Interactive Net Server v7.0.454.5
    Lines: 33

    Do a search of the messages database here for

    ".ocx or one of its dependencies" or simply "ocx" (without quotes)

    in the WIN Server or wcreport message groups- there has been some
    discussion and remedies to a few ocx problems. Messages dating from about 05.16.2002 to present are the one's your are looking for.

    As far as I know, the runtime error 13 has not yet been rectified, at
    least I still have that problem when working with messages in wcreport.


    --
    Dave



    Let me raise my hand... I have had this problem since the upgrade
    also. Been waiting for some sort of a fix. Wwill continue reading.

    webmaster@teabbs.com


    On 6/16/02 4:16 AM, DAVE GOURD wrote to ALL:

    After performing the v5.5 AUP, when trying to run wcreports from our server I got the following error(in a popup window):

    "mscomctl.ocx or one of its dependencies is not correctly register
    file is missing or invalid"


    --- Platinum Xpress/Win/WINServer v3.1
    * Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)