Component 'MSCOMCTL.OCX' or one of its dependencies is not correctly registered: a file is missing or invalid
ComponentError returned the following data transfer error.
Setup will now abort.
Media Name: data
Component: Shared DLLs
File Group: regdlls
File: C:\winnt\system32\msexcl35.dll
Error Number: -119
Component 'MSCOMCTL.OCX' or one of its dependencies is not correctly registered: a file is missing or invalid
ComponentError returned the following data transfer error.
Setup will now abort.
Media Name: data
Component: Shared DLLs
File Group: regdlls
File: C:\winnt\system32\msexcl35.dll
Error Number: -119
Component 'MSCOMCTL.OCX' or one of its dependencies is not correctly registered: a file is missing or invalid
Open up a command prompt and go to your System32 directory and see if
this file exists... If it does run the following command:
regsvr32 MSCOMCTL.OCX
You should get a response that the registration was successful...
ComponentError returned the following data transfer error.
Setup will now abort.
Media Name: data
Component: Shared DLLs
File Group: regdlls
File: C:\winnt\system32\msexcl35.dll
Error Number: -119
I can't think of what the InstallShield error is for this, but I think
it means that there was something wrong with this file in archive... Or something has the file locked and readonly so the script couldn't
install the file... See if this file exists (Its for the EXCEL
export capabilities)...
Mark Bappe
S and T Software
ComponentError returned the following data transfer error.
Setup will now abort.
Media Name: data
Component: Shared DLLs
File Group: regdlls
File: C:\winnt\system32\msexcl35.dll
I don't seem to have the file. Do you know where I can download it from?
from?ComponentError returned the following data transfer error.
Setup will now abort.
Media Name: data
Component: Shared DLLs
File Group: regdlls
File: C:\winnt\system32\msexcl35.dll
I don't seem to have the file. Do you know where I can download it
Hmmm... Thats usually distributed with the JET Installations... You can check Microsofts site for the JET downloads...
Mark Bappe
S and T Software
Component 'MSCOMCTL.OCX' or one of its dependencies is not correctly registered: a file is missing or invalid
Open up a command prompt and go to your System32 directory and see if
this file exists... If it does run the following command:
regsvr32 MSCOMCTL.OCX
You should get a response that the registration was successful...
ComponentError returned the following data transfer error.
Setup will now abort.
Media Name: data
Component: Shared DLLs
File Group: regdlls
File: C:\winnt\system32\msexcl35.dll
Error Number: -119
I can't think of what the InstallShield error is for this, but I think
it means that there was something wrong with this file in archive... Or something has the file locked and readonly so the script couldn't
install the file... See if this file exists (Its for the EXCEL
export capabilities)...
Mark Bappe
S and T Software
Mark:
Is is possible that the MSCOMCTL.OCX problem is related to the ERROR 13, Mismatch problem I have had for a couple of years now when trying to read email and messages with wcreports?
John
Mark:
Is is possible that the MSCOMCTL.OCX problem is related to the ERR Mismatch problem I have had for a couple of years now when trying
email and messages with wcreports?
John
Anything is possible since I have never been able to reproduce the problem... But it is really doubtful... If that were the case you
would be having quite a few other problems as well...
There is either something in your data that its not liking... Error 13 - Type mismatch is usally called by an implicit conversion of something
that wasn't expected... IE: Say something like "one" is entered in
place of "1"... Doing math on something like this would give you a Type Mismatch error...
Mark Bappe
S and T Software
readMark:
Is is possible that the MSCOMCTL.OCX problem is related to the ERROR 13, Mismatch problem I have had for a couple of years now when trying to
email and messages with wcreports?
John
Anything is possible since I have never been able to reproduce the problem... But it is really doubtful... If that were the case you
would be having quite a few other problems as well...
There is either something in your data that its not liking... Error 13 - Type mismatch is usally called by an implicit conversion of something
that wasn't expected... IE: Say something like "one" is entered in
place of "1"... Doing math on something like this would give you a Type Mismatch error...
Mark Bappe
S and T Software
Mark:but
I always thought that it might be the wcconvert program in one of the AUPs
now that you brought up the zero division I changed my mail areas settings that contained zero's to a number. Even though some of the wcconfigsettings
when set to zero usually means unlimited maybe one of those settingsrequires
a number. I'll see what happens.
Thanks again,
John Kidwell
I too am still getting the error 13 type mismatch and like John, has
been for quite a long time now.
For me it pops up when I try to open ANY message in ANY conference from
any machine on the LAN except the machine where WINS is installed.
WcReports works great on the server. I have lived with it, but it is a
pain when I have to go clear to the other end of the building just to
use WcReports on the server.
WINServer is winnt 40 wkst
Other machines are win 95 and 98SE
AUPs butMark:
I always thought that it might be the wcconvert program in one of the
settingsnow that you brought up the zero division I changed my mail areas
settingsthat contained zero's to a number. Even though some of the wcconfig
requireswhen set to zero usually means unlimited maybe one of those settings
a number. I'll see what happens.
Thanks again,
John Kidwell
Actually that shouldn't be the issue... Div by 0 is a completely
different error message... Do you have any machines that wcReports
actually do run on?
Is it when you double click on the conferences, or is it when you ar
double clicking on a message?
Is it all conferences?
Mark Bappe
S and T Software
--- Platinum Xpress/Win/WINServer v3.1I too am still getting the error 13 type mismatch and like John, has
been for quite a long time now.
For me it pops up when I try to open ANY message in ANY conference
any machine on the LAN except the machine where WINS is installed.
WcReports works great on the server. I have lived with it, but it
pain when I have to go clear to the other end of the building just to
use WcReports on the server.
WINServer is winnt 40 wkst
Other machines are win 95 and 98SE
Is there anything different on those machines than the Server? IE: Is
the date/time set the same with the same format? Do you have the same
fonts installed? etc... Win95 I could maybe see if it didn't have the proper updates, but 98SE should have all relevant updates out of the
box...
Does this happen when you double click on a conference or when you
double click on a message in a conference?
Mark Bappe
S and T Software
AUPs butMark:
I always thought that it might be the wcconvert program in one of the
settingsnow that you brought up the zero division I changed my mail areas
settingsthat contained zero's to a number. Even though some of the wcconfig
requireswhen set to zero usually means unlimited maybe one of those settings
a number. I'll see what happens.
Thanks again,
John Kidwell
Actually that shouldn't be the issue... Div by 0 is a completely
different error message... Do you have any machines that wcReports
actually do run on?
Is it when you double click on the conferences, or is it when you ar
double clicking on a message?
Is it all conferences?
Mark Bappe
S and T Software
I too am still getting the error 13 type mismatch and like John, has
been for quite a long time now.
For me it pops up when I try to open ANY message in ANY conference from any machine on the LAN except the machine where WINS is installed.
WcReports works great on the server. I have lived with it, but it is a pain when I have to go clear to the other end of the building just to
use WcReports on the server.
WINServer is winnt 40 wkst
Other machines are win 95 and 98SE
Is there anything different on those machines than the Server? IE: Is
the date/time set the same with the same format? Do you have the same
fonts installed? etc... Win95 I could maybe see if it didn't have the proper updates, but 98SE should have all relevant updates out of the
box...
Does this happen when you double click on a conference or when you
double click on a message in a conference?
Mark Bappe
S and T Software
Mark:
These are the same problems I was having ... a lot of the dll's are there already, just need to register them.
--
Thank you
Fred Burgess
Some of my best friends are MUTANTS!
SysOp - TCL BBS
Come visit use www.tclbbs.com
Online Store: http://www.stores.ebay.com/tclbbsonline
<MARK BAPPE> wrote in message news:1057126380.37.1056664156@winserver.com...
ComponentError returned the following data transfer error.
Setup will now abort.
Media Name: data
Component: Shared DLLs
File Group: regdlls
File: C:\winnt\system32\msexcl35.dll
from?I don't seem to have the file. Do you know where I can download it
Hmmm... Thats usually distributed with the JET Installations... You can check Microsofts site for the JET downloads...
Mark Bappe
S and T Software
It appears that my DLL's and OCX' are there but registering them manually would be an unexperienced task for me to perform.
John
On 1/2/04 4:18 PM, FRED BURGESS wrote to MARK BAPPE:there
Mark:
These are the same problems I was having ... a lot of the dll's are
already, just need to register them.
--
Thank you
Fred Burgess
Some of my best friends are MUTANTS!
SysOp - TCL BBS
Come visit use www.tclbbs.com
Online Store: http://www.stores.ebay.com/tclbbsonline
news:1057126380.37.1056664156@winserver.com...<MARK BAPPE> wrote in message
canComponentError returned the following data transfer error. Setup will now abort.
Media Name: data
Component: Shared DLLs
File Group: regdlls
File: C:\winnt\system32\msexcl35.dll
from?I don't seem to have the file. Do you know where I can download it
Hmmm... Thats usually distributed with the JET Installations... You
check Microsofts site for the JET downloads...
Mark Bappe
S and T Software
I know what you mean ... but there was a message that told how to do it .. and I don't recall the exact command line
regsvr32 drive:\path\filename
If you did a regsver32 /? it should tell you the actual command line
<JOHN KIDWELL> wrote in message news:1073078355.37.1057144204@winserver.com...
It appears that my DLL's and OCX' are there but registering them manually would be an unexperienced task for me to perform.
John
On 1/2/04 4:18 PM, FRED BURGESS wrote to MARK BAPPE:
Mark:
thereThese are the same problems I was having ... a lot of the dll's are
already, just need to register them.
--
Thank you
Fred Burgess
Some of my best friends are MUTANTS!
SysOp - TCL BBS
Come visit use www.tclbbs.com
Online Store: http://www.stores.ebay.com/tclbbsonline
news:1057126380.37.1056664156@winserver.com...<MARK BAPPE> wrote in message
ComponentError returned the following data transfer error. Setup will now abort.
Media Name: data
Component: Shared DLLs
File Group: regdlls
File: C:\winnt\system32\msexcl35.dll
from?I don't seem to have the file. Do you know where I can download it
canHmmm... Thats usually distributed with the JET Installations... You
check Microsofts site for the JET downloads...
Mark Bappe
S and T Software
| Sysop: | Rempala |
|---|---|
| Location: | Richlands, NC |
| Users: | 103 |
| Nodes: | 10 (0 / 10) |
| Uptime: | 118:44:48 |
| Calls: | 158 |
| Files: | 6 |
| Messages: | 110,763 |