1. Forum
  2. FidoNet Areas
  3. ELIST

  • msstdfmt.dll

    From CARLOS URATA@1:124/5013 to All on Thu Jan 31 19:16:58 2019
    Date: Sun, 26 Dec 2004 11:12:12 -0400
    From: CARLOS URATA
    To: ALL
    Subject: msstdfmt.dll
    Newsgroups: win.server.wcreports
    Message-ID: <1104077532.37.0@winserver.com>
    X-Mailer: Wildcat! Interactive Net Server v7.0.454.5
    Lines: 6

    I just have installed v6 build 451.3. After including some users and try to change it via wcReport, I receive runtime error 713, it says Class not registered. I need the following file installed: MSSTDFMT.DLL.
    This file is included in my winnt/system32 anyway.
    Should I put this file in wc directory?

    --- Platinum Xpress/Win/WINServer v3.1
    * Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)
  • From HECTOR SANTOS@1:124/5013 to All on Thu Jan 31 19:16:58 2019
    Date: Wed, 29 Dec 2004 13:50:38 -0400
    From: HECTOR SANTOS
    To: CARLOS URATA
    Subject: RE: msstdfmt.dll
    Newsgroups: win.server.wcreports
    Message-ID: <1104346238.37.1104077532@winserver.com>
    References: <1104077532.37.0@winserver.com>
    X-WcMsg-Attr: Rcvd
    X-Mailer: Wildcat! Interactive Net Server v7.0.454.5
    Lines: 22

    Did you do a fresh install of WCREPORTS?

    Or did you run WCReportsUpgrade.exe?

    You just can't get that one file as MS distributes the whole thing as a bundle.
    A Fresh install of v6.0 wcReports from the CD will do this and via the AUP, you should run WCreportsUpgrade.exe, which is basically all its doing, installing the MS Visual Basic Runtime distribution pack.

    Try that.


    On 12/26/04 11:12 AM, CARLOS URATA wrote to ALL:

    I just have installed v6 build 451.3. After including some users and try to change it via wcReport, I receive runtime error 713, it says Class not registered. I need the following file installed: MSSTDFMT.DLL.
    This file is included in my winnt/system32 anyway.
    Should I put this file in wc directory?



    --- Platinum Xpress/Win/WINServer v3.1
    * Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)
  • From CHRISTOPHER WEIS@1:124/5013 to All on Thu Jan 31 19:16:58 2019
    Date: Tue, 16 Aug 2005 08:29:47 -0400
    From: CHRISTOPHER WEIS
    To: HECTOR SANTOS
    Subject: RE: msstdfmt.dll
    Newsgroups: win.server.wcreports
    Message-ID: <1124195387.37.1104346238@winserver.com>
    References: <1104346238.37.1104077532@winserver.com>
    X-WcMsg-Attr: Rcvd
    X-Mailer: Wildcat! Interactive Net Server v7.0.454.5
    Lines: 40

    I am using v451.2 The AUP installed the WCReportsUpgrade.exe. I get the same error also. I ran the exe and am stil on 451.2.

    I uninstalled wcReport and reinstalled. Still same issue.

    What should I do next? The program works fine except the users tab.

    Thanks
    -Chris




    On 12/29/04 1:50 PM, HECTOR SANTOS wrote to CARLOS URATA:

    | Did you do a fresh install of WCREPORTS?
    |
    | Or did you run WCReportsUpgrade.exe?
    |
    | You just can't get that one file as MS distributes the whole thing as a bundle.
    | A Fresh install of v6.0 wcReports from the CD will do this and via the AUP, | you should run WCreportsUpgrade.exe, which is basically all its doing,
    | installing the MS Visual Basic Runtime distribution pack.
    |
    | Try that.
    |
    |
    | On 12/26/04 11:12 AM, CARLOS URATA wrote to ALL:
    |
    | > I just have installed v6 build 451.3. After including some users and try to | > change it via wcReport, I receive runtime error 713, it says Class not
    | > registered. I need the following file installed: MSSTDFMT.DLL.
    | > This file is included in my winnt/system32 anyway.
    | > Should I put this file in wc directory?
    | >
    |
    |


    --- Platinum Xpress/Win/WINServer v3.1
    * Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)
  • From HECTOR SANTOS@1:124/5013 to All on Thu Jan 31 19:16:58 2019
    Date: Wed, 17 Aug 2005 00:59:14 -0400
    From: HECTOR SANTOS
    To: CHRISTOPHER WEIS
    Subject: Re: msstdfmt.dll
    Newsgroups: win.server.wcreports
    Message-ID: <1124255047.37.1124195387@winserver.com>
    References: <1124195387.37.1104346238@winserver.com>
    X-WcMsg-Attr: Rcvd
    X-Mailer: Wildcat! Interactive Net Server v7.0.454.5
    Lines: 66

    Gee, I don't know. Everyone reporting similar wcreport install issues are always solved either with:

    WCREPORTSUPGRADE.EXE

    or the older version

    WCRDLLS.EXE from FTP://FTP.SANTRONICS.COM

    WCREPORTSUPGRADE.EXE is suppose to be the newer one of WCRDLLS.EXE which installed More of the Microsoft stuff that we felt wasn't necessary. The
    new one cleaned it up. But we did have some people who had to install the
    old one for some reason, and it worked for them when the new one did not.

    Maybe it is an OS thing.

    What OS are you using?



    <CHRISTOPHER WEIS> wrote in message news:1124195387.37.1104346238@winserver.com...
    I am using v451.2 The AUP installed the WCReportsUpgrade.exe. I get the
    same
    error also. I ran the exe and am stil on 451.2.

    I uninstalled wcReport and reinstalled. Still same issue.

    What should I do next? The program works fine except the users tab.

    Thanks
    -Chris




    On 12/29/04 1:50 PM, HECTOR SANTOS wrote to CARLOS URATA:

    | Did you do a fresh install of WCREPORTS?
    |
    | Or did you run WCReportsUpgrade.exe?
    |
    | You just can't get that one file as MS distributes the whole thing as a bundle.
    | A Fresh install of v6.0 wcReports from the CD will do this and via the
    AUP,
    | you should run WCreportsUpgrade.exe, which is basically all its doing,
    | installing the MS Visual Basic Runtime distribution pack.
    |
    | Try that.
    |
    |
    | On 12/26/04 11:12 AM, CARLOS URATA wrote to ALL:
    |
    | > I just have installed v6 build 451.3. After including some users and
    try to
    | > change it via wcReport, I receive runtime error 713, it says Class not
    | > registered. I need the following file installed: MSSTDFMT.DLL.
    | > This file is included in my winnt/system32 anyway.
    | > Should I put this file in wc directory?
    | >
    |
    |


    --- Platinum Xpress/Win/WINServer v3.1
    * Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)
  • From CHRISTOPHER WEIS@1:124/5013 to All on Thu Jan 31 19:16:58 2019
    Date: Wed, 17 Aug 2005 09:20:56 -0400
    From: CHRISTOPHER WEIS
    To: HECTOR SANTOS
    Subject: Re: msstdfmt.dll
    Newsgroups: win.server.wcreports
    Message-ID: <1124284856.37.1124255047@winserver.com>
    References: <1124255047.37.1124195387@winserver.com>
    X-WcMsg-Attr: Rcvd
    X-Mailer: Wildcat! Interactive Net Server v7.0.454.5
    Lines: 25

    I am using Windows Server 2003 Web Edition.


    On 8/17/05 12:59 AM, HECTOR SANTOS wrote to CHRISTOPHER WEIS:

    | Gee, I don't know. Everyone reporting similar wcreport install issues are
    | always solved either with:
    |
    | WCREPORTSUPGRADE.EXE
    |
    | or the older version
    |
    | WCRDLLS.EXE from FTP://FTP.SANTRONICS.COM
    |
    | WCREPORTSUPGRADE.EXE is suppose to be the newer one of WCRDLLS.EXE which
    | installed More of the Microsoft stuff that we felt wasn't necessary. The
    | new one cleaned it up. But we did have some people who had to install the
    | old one for some reason, and it worked for them when the new one did not.
    |
    | Maybe it is an OS thing.
    |
    | What OS are you using?
    |


    --- Platinum Xpress/Win/WINServer v3.1
    * Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)
  • From CHRIS COSTAKIS@1:124/5013 to All on Thu Jan 31 19:16:58 2019
    Date: Wed, 17 Aug 2005 09:58:32 -0400
    From: CHRIS COSTAKIS
    To: CHRISTOPHER WEIS
    Subject: RE: msstdfmt.dll
    Newsgroups: win.server.wcreports
    Message-ID: <1124287112.37.1124195387@winserver.com>
    References: <1124195387.37.1104346238@winserver.com>
    X-WcMsg-Attr: Rcvd
    X-Mailer: Wildcat! Interactive Net Server v7.0.454.5
    Lines: 10

    On 8/16/05 8:29 AM, CHRISTOPHER WEIS wrote to HECTOR SANTOS:

    I am using v451.2 The AUP installed the WCReportsUpgrade.exe. I get the
    same
    error also. I ran the exe and am stil on 451.2.

    I uninstalled wcReport and reinstalled. Still same issue.

    I didn't realize there was a version later than 451.2? That is still what I am running as well.
    --- Platinum Xpress/Win/WINServer v3.1
    * Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)
  • From CHRISTOPHER WEIS@1:124/5013 to All on Thu Jan 31 19:16:58 2019
    Date: Wed, 17 Aug 2005 13:54:22 -0400
    From: CHRISTOPHER WEIS
    To: CHRIS COSTAKIS
    Subject: RE: msstdfmt.dll
    Newsgroups: win.server.wcreports
    Message-ID: <1124301262.37.1124287112@winserver.com>
    References: <1124287112.37.1124195387@winserver.com>
    X-WcMsg-Attr: Rcvd
    X-Mailer: Wildcat! Interactive Net Server v7.0.454.5
    Lines: 20

    I was going off one of the previous message on this thread. I am just unable to get the Users tab to work, and thought this might be why.




    On 8/17/05 9:58 AM, CHRIS COSTAKIS wrote to CHRISTOPHER WEIS:

    | On 8/16/05 8:29 AM, CHRISTOPHER WEIS wrote to HECTOR SANTOS:
    |
    | -> I am using v451.2 The AUP installed the WCReportsUpgrade.exe. I get the
    | same
    | -> error also. I ran the exe and am stil on 451.2.
    | ->
    | -> I uninstalled wcReport and reinstalled. Still same issue.
    |
    | I didn't realize there was a version later than 451.2? That is still what I | am running as well.


    --- Platinum Xpress/Win/WINServer v3.1
    * Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)
  • From HECTOR SANTOS@1:124/5013 to All on Thu Jan 31 19:16:58 2019
    Date: Fri, 19 Aug 2005 02:43:21 -0400
    From: HECTOR SANTOS
    To: CHRISTOPHER WEIS
    Subject: Re: msstdfmt.dll
    Newsgroups: win.server.wcreports
    Message-ID: <1124434100.37.1124301262@winserver.com>
    References: <1124301262.37.1124287112@winserver.com>
    X-WcMsg-Attr: Rcvd
    X-Mailer: Wildcat! Interactive Net Server v7.0.454.5
    Lines: 37

    Someone else fixed this by manually registering msstdfmt.dll

    do this

    cd \winnt\system32
    regsvr32 msstdfmt.dll

    and see if this fixes it.

    -- Hector

    <CHRISTOPHER WEIS> wrote in message news:1124301262.37.1124287112@winserver.com...
    I was going off one of the previous message on this thread. I am just
    unable
    to get the Users tab to work, and thought this might be why.




    On 8/17/05 9:58 AM, CHRIS COSTAKIS wrote to CHRISTOPHER WEIS:

    | On 8/16/05 8:29 AM, CHRISTOPHER WEIS wrote to HECTOR SANTOS:
    |
    | -> I am using v451.2 The AUP installed the WCReportsUpgrade.exe. I get
    the
    | same
    | -> error also. I ran the exe and am stil on 451.2.
    | ->
    | -> I uninstalled wcReport and reinstalled. Still same issue.
    |
    | I didn't realize there was a version later than 451.2? That is still
    what I
    | am running as well.


    --- Platinum Xpress/Win/WINServer v3.1
    * Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)
  • From CHRISTOPHER WEIS@1:124/5013 to All on Thu Jan 31 19:16:58 2019
    Date: Sun, 21 Aug 2005 12:09:33 -0400
    From: CHRISTOPHER WEIS
    To: HECTOR SANTOS
    Subject: Re: msstdfmt.dll
    Newsgroups: win.server.wcreports
    Message-ID: <1124640573.37.1124434100@winserver.com>
    References: <1124434100.37.1124301262@winserver.com>
    X-WcMsg-Attr: Rcvd
    X-Mailer: Wildcat! Interactive Net Server v7.0.454.5
    Lines: 19

    Did the trick!

    Thanks!
    -Chris


    On 8/19/05 2:43 AM, HECTOR SANTOS wrote to CHRISTOPHER WEIS:

    | Someone else fixed this by manually registering msstdfmt.dll
    |
    | do this
    |
    | cd \winnt\system32
    | regsvr32 msstdfmt.dll
    |
    | and see if this fixes it.
    |
    | -- Hector

    --- Platinum Xpress/Win/WINServer v3.1
    * Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)