Good day! I noticed this evening that a message I forwarded from the BBS to my personal e-mail did not go through the relay but instead sent direct. This was verified by looking at the raw message header and seeing no relay information.

My current configuration specifies:

RelayServer = redacted
RelayPort = 587
RelayUsername = redacted
RelayPassword = redacted

The message header clearly shows the forwarded message did not go through the relay but direct. I noticed this also going to Tony Langdon as well in the sbbs.log.

If you require any header data or additional information, please let me know.

Brian Klauss <-> Dream Master
Caught in a Dream | caughtinadream.com a Synchronet BBS

---
þ Synchronet þ Caught in a Dream - caughtinadream.com
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)

Re: Mail versus Forwarded Mail
By: Dream Master to Digital Man on Thu Feb 25 2021 05:47 pm

Good day! I noticed this evening that a message I forwarded from the BBS to my personal e-mail did not go through the relay but instead sent direct. This was verified by looking at the raw message header and seeing no relay information.

My current configuration specifies:

RelayServer = redacted
RelayPort = 587
RelayUsername = redacted
RelayPassword = redacted

The message header clearly shows the forwarded message did not go through the relay but direct. I noticed this also going to Tony Langdon as well in the sbbs.log.

If you require any header data or additional information, please let me know.

You need the RELAY_TX option flag as shown here: http://wiki.synchro.net/howto:relay_smtp
and here:
http://wiki.synchro.net/server:mail#sbbsini
--
digital man

This Is Spinal Tap quote #9:
David St. Hubbins: I mean, it's not your job to be as confused as Nigel.
Norco, CA WX: 64.0øF, 11.0% humidity, 4 mph SSW wind, 0.00 inches rain/24hrs --- SBBSecho 3.13-Linux
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)

Re: Mail versus Forwarded Mail
By: Digital Man to Dream Master on Thu Feb 25 2021 05:20 pm

You need the RELAY_TX option flag as shown here: http://wiki.synchro.net/howto:relay_smtp
and here:
http://wiki.synchro.net/server:mail#sbbsini

Option has been set since I started relaying via SendGrid:

Options = ALLOW_POP3 | USE_SUBMISSION_PORT | TLS_SUBMISSION | TLS_POP3 | ALLOW_SYSOP_ALIASES | RELAY_AUTH_PLAIN | RELAX_TX

Problem persists.

Brian Klauss <-> Dream Master
Caught in a Dream | caughtinadream.com a Synchronet BBS

---
þ Synchronet þ Caught in a Dream - caughtinadream.com
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)

Re: Mail versus Forwarded Mail
By: Dream Master to Digital Man on Thu Feb 25 2021 08:40 pm

Re: Mail versus Forwarded Mail
By: Digital Man to Dream Master on Thu Feb 25 2021 05:20 pm

You need the RELAY_TX option flag as shown here: http://wiki.synchro.net/howto:relay_smtp
and here:
http://wiki.synchro.net/server:mail#sbbsini

Option has been set since I started relaying via SendGrid:

Options = ALLOW_POP3 | USE_SUBMISSION_PORT | TLS_SUBMISSION | TLS_POP3 | ALLOW_SYSOP_ALIASES | RELAY_AUTH_PLAIN | RELAX_TX

Problem persists.

Odd. Pasting the mail server log output could be helpful in determining why.
--
digital man

Synchronet/BBS Terminology Definition #75:
SyncEdit = A defunct 3rd party full-screen editor written for Synchronet
Norco, CA WX: 56.1øF, 13.0% humidity, 0 mph SSW wind, 0.00 inches rain/24hrs --- SBBSecho 3.13-Linux
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)

Re: Mail versus Forwarded Mail
By: Digital Man to Dream Master on Thu Feb 25 2021 11:26 pm

Options = ALLOW_POP3 | USE_SUBMISSION_PORT | TLS_SUBMISSION | TLS_POP3 | ALLOW_SYSOP_ALIASES | RELAY_AUTH_PLAIN | RELAX_TX

Odd. Pasting the mail server log output could be helpful in determining why.

So, um, yeah, umm, look at how RELAY is spelled.

I think I'm going to stop typing after midnight moving forward.

Anyway, thank you for the non support support.

I owe you one.


Brian Klauss <-> Dream Master
Caught in a Dream | caughtinadream.com a Synchronet BBS

---
þ Synchronet þ Caught in a Dream - caughtinadream.com
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)

On 2/25/2021 7:40 PM, Dream Master wrote:

Re: Mail versus Forwarded Mail
By: Digital Man to Dream Master on Thu Feb 25 2021 05:20 pm

> You need the RELAY_TX option flag as shown here:
> http://wiki.synchro.net/howto:relay_smtp
> and here:
> http://wiki.synchro.net/server:mail#sbbsini

Option has been set since I started relaying via SendGrid:

Options = ALLOW_POP3 | USE_SUBMISSION_PORT | TLS_SUBMISSION | TLS_POP3 | ALLOW_SYSOP_ALIASES | RELAY_AUTH_PLAIN | RELAX_TX

Problem persists.

Here's my relevant config settings for SendGrid. I'm sending through
port 587 and the username is literally "apikey" with the key in the
password field.

[Mail] SMTP/POP3 Mail Server
...
RelayServer = smtp.sendgrid.net
RelayPort = 587
RelayUsername = apikey
RelayPassword = REDACTED
Options = ALLOW_POP3 | USE_SUBMISSION_PORT | TLS_SUBMISSION |
TLS_POP3 | ALLOW_RELAY | RELAY_TX | RELAY_AUTH_PLAIN
--
Michael J. Ryan - tracker1@roughneckbbs.com
---
ï¿­ Synchronet ï¿­ Roughneck BBS - roughneckbbs.com
--- SBBSecho 3.13-Linux
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)

On 2/25/2021 7:40 PM, Dream Master wrote:

Option has been set since I started relaying via SendGrid:

Options = ALLOW_POP3 | USE_SUBMISSION_PORT | TLS_SUBMISSION
| TLS_POP3 | ALLOW_SYSOP_ALIASES | RELAY_AUTH_PLAIN
| RELAX_TX

________^

RELAY_TX ... You have an X there.
--
Michael J. Ryan - tracker1@roughneckbbs.com
---
ï¿­ Synchronet ï¿­ Roughneck BBS - roughneckbbs.com
--- SBBSecho 3.13-Linux
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)